200mm grates		Length mm	Part No.	Wgt (kg)					Spec Info
LOAD CLASS B - AS 3996 - 80kN - approximate wheel load 2,670kg
	Type 647Q/648Q Stainless Wedgewire1 Heelsafe® Anti-Slip	1000 500	98973 98993	7.5 3.7
	Type 643Q/644Q Stainless 5 Star1 Heelsafe® Anti-Slip	1000 500	141187 141188	7.5 3.7
	Type 607Q/608Q Galv Transverse	1000 500	141749 141716	7.8 4.2
LOAD CLASS D - AS 3996 – 210kN - approximate wheel load 8,000kg
	Type 605Q/606Q Galv Mesh Type 630Q/631Q Stainless Mesh	1000 500 1000 500	141741 141742 141746 141747	13.8 7.1 13.0 6.6
	Type 680Q Iron Wave Heelsafe® Anti-Slip	500	93955	12.7
	Type 681Q Iron Decorative Heelsafe® Anti-Slip	500	93956	12.2
	Type 661Q Iron Slotted	500	95076	12.0
	Type 678Q Iron Intercept1 Heelsafe® Anti-Slip	500	95038	10.0
	Type 677Q Iron Galv Intercept1 Heelsafe® Anti-Slip	500	141752	10.0

Notes:
¹ - Meets ASME A112.6.3 Section 7.12 (American high heel standard).

  

200mm grates		Length mm	Part No.	Wgt (kg)					Spec Info	Water Intake
LOAD CLASS B - AS 3996 - 80kN - approximate wheel load 2,670kg
	Type 643D/644D Stainless 5 Star1 Heelsafe® Anti-Slip	1000 500	142221 142222	7.5 3.7
	Type 607Q/608Q Galvanised Transverse2	1000 500	142411 142412	7.8 4.2
LOAD CLASS D - AS 3996 – 210kN - approximate wheel load 8,000kg
	Type 605Q/606Q Galvanised Mesh2	1000 500	142405 142406	13.8 7.1
	Type 630Q/631Q Stainless Mesh2	1000 500	142407 142408	13.0 6.6
	Type 680D Iron Wave1 Heelsafe® Anti-Slip	500	142462	12.7
	Type 660D Iron Slotted	500	142177	12.0
	Type 676D Iron Intercept1 Heelsafe® Anti-Slip	500	142173	10.0
	Type 675D Iron Galv Intercept1 Heelsafe® Anti-Slip	500	142174	10.0

Notes:
¹ - Meets ASME A112.6.3 Section 7.12 (American high heel standard).
² - Denotes QuickLok grates. QuickLok bar included in grate Part Number.

K200/KS200 Trench Grates Type 605Q-606Q-630Q-631Q Steel Mesh Grate Type 607Q-608Q Galvanised Transverse Grate Type 643Q-644Q Stainless 5 Star Heelsafe Anti-Slip Grate Type 647Q-648Q Stainless Wedgewire Heelsafe Anti-Slip Grate Type 661Q Iron Slotted Grate Type 677Q Iron Galvanised Intercept Heelsafe Anti-Slip Grate Type 678Q Iron Intercept Heelsafe Anti-Slip Grate Type 680Q Iron Wave Heelsafe Anti-Slip Grate Type 681Q Iron Decorative Heelsafe Anti-Slip Grate

 

KlassikDrain / SlabDrain HK Series	K200	KS200	H200K / H200KS
Channels & In-line Pits
Stainless 5 Star Heelsafe Anti-Slip Grates (Class B)
Galvanised Transverse Grates (Class B)
Steel Mesh Grates (Class D)
Iron Wave Heelsafe Anti-Slip Grates (Class D)
Iron Slotted Grates (Class D)
Iron Intercept Heelsafe Anti-Slip Grates (Class D)
Iron Galvanised Intercept Heelsafe Anti-Slip Grates (Class D)

 

At ACO, we believe that pedestrian friendly grates and slip resistance go hand in hand. The grates with the trademark, Heelsafe^® Anti-Slip comply to all four specific user requirements; heelsafe, wheelchair and walking cane safe, bicycle safe and are slip rated.

A slip resistance classification is assigned to these grates. AS 4586 sets out three recognised tests that determine slip resistance: wet pendulum test (P-rating), wet-barefoot inclining platform test (A, B or C rating) and oil-wet inclining platform test (R-rating). HB 198 references AS 4586 by specifying the minimum slip resistance ratings dependent on the application.

Grates with raised mechanical nodes have excellent durability compared with those produced by manufacturers who apply coatings or mechanically alter (bead blast etc...) to attain a level of slip resistance. These processes will not only ensure a short term slip resistance due to the wearing process but can introduce impurities in the material which will accelerate corrosion.

ACO’s range of Heelsafe^® Anti-Slip grates have raised mechanical nodes and are available in plastic, stainless steel and ductile iron, for more information visit www.heelsafe.co.nz

QuickLok

Comprised of a glass nylon stud, factory fitted to the grate, which allows a snap fit into a stainless steel spring clip in the locking bar. With no loose bolts or bars, QuickLok provides highly secure boltless locking, that is easy to remove/replace for maintenance and cleaning. Saves time and money during installation.

Locate locking bar in recesses, rotate and use hammer to tap securely into place. Serrated ends grip in recess.

K200/K300 channels use plastic safety clip to hold in place.

To install grate, align QuickLok stud directly over locking bar.

Push down or stand on grate until it clicks into position.

To remove first grate, insert grate removal tool into slots at end of grate, pull up sharply. Rest of grates can be removed by hand.

To remove bar, insert screwdriver into hole at end of bar and lever back serrated end, rotate bar free.

DrainLok - barless and boltless locking system

Fast locking device removes the need for bars and bolts and improves the channels hydraulic capacity. The DrainLok mechanism simply clips into the channel edge rail for quick installation. ACO’s DrainLok grates are fitted with anti–shunt lugs that restrict grate movement when installed, improving durability and longevity of the system.

Position grate onto channel and align anti–shunt lugs with the recess in the rail.

Push down or stand on the grate until it clicks into position.

To remove first grate, insert grate removal tool into slots at the end of the grate and pull up sharply. Remaining grates can be removed by hand.